Инверторы «ТЕРМИТ» серий ВДИ-ПРОФИ и ПРОФИ (LED) для строительно-промышленной эксплуатации

Welding inverters "TERMITE" series of VDI-PROFI

         Welding machines "TERMITE" series PROFI – most popular model among professionals. Affordable price, simplicity and ease of operation, combined with reliability and increased warranty period of maintenance make this series a hit among the machines "TERMITE».

         In this series apartof, as in the whole technique of "TERMITE", introduced the most modern technologies, improving technical parameters and the quality of the welding. So, today in devices "TERMITE" series PRO used silicon IGBT, which are the main type of fully controllable power transistor switches, short-circuit resistant in the power circuit. TRENCHSTOP™5 IGBT so good, in fact, set a new standard for the complex specifications, and, accordingly, their use gives the technique of "TERMITE" incomparable competitive advantage.

         One of the key indicators and advantages is power consumption and efficiency of the welding machine, i.e. its ability and efficiency in energy conversion. All vehicles "TERMITE" used transformers of amorphous (nanocrystalline) alloys, providing a more than fivefold reduction of losses of idling of transformers compared with traditional magnetic cores from electrical steel. Since the inner inductive losses from inverters "TERMITE" virtually non-existent, all the consumable welding inverter power released in the arc that makes it the most effective!

         Minor level of generated electromagnetic interference allows the use of machines of the series PROFI network with low voltage of up to 130V. And the use of a smoothing choke gives a stable welding arc characteristics, making possible to achieve beautiful welds in different spatial positions.

         The superiority of the machines "TERMITE" PRO over the PRO series is as follows:
- more reliable and rigid mounting of the internal elements in the casing that allows you to survive small bumps and falls of the apparatus;
- a more powerful power supply, giving greater stability of the welding arc and is much less susceptible to surges and voltage surges in the network;
- the more powerful the diodes, the greater the number and capacity of capacitors and larger heatsinks, which together gives the best indicator of MON, equal to 90% at maximum current and welding electrode Ø 6mm.

         Special popularity of this series of machines has won the masters outreach, private specialists, contractors, gas services, water utility, road, repair and construction companies.

Welding inverters "TERMITE" series of VDI-PROFI

         Welding machines "TERMITE" series PROFI – most popular model among professionals. Affordable price, simplicity and ease of operation, combined with reliability and increased warranty period of maintenance make this series a hit among the machines "TERMITE».

         In this series apartof, as in the whole technique of "TERMITE", introduced the most modern technologies, improving technical parameters and the quality of the welding. So, today in devices "TERMITE" series PRO used silicon IGBT, which are the main type of fully controllable power transistor switches, short-circuit resistant in the power circuit. TRENCHSTOP™5 IGBT so good, in fact, set a new standard for the complex specifications, and, accordingly, their use gives the technique of "TERMITE" incomparable competitive advantage.

         One of the key indicators and advantages is power consumption and efficiency of the welding machine, i.e. its ability and efficiency in energy conversion. All vehicles "TERMITE" used transformers of amorphous (nanocrystalline) alloys, providing a more than fivefold reduction of losses of idling of transformers compared with traditional magnetic cores from electrical steel. Since the inner inductive losses from inverters "TERMITE" virtually non-existent, all the consumable welding inverter power released in the arc that makes it the most effective!

         Minor level of generated electromagnetic interference allows the use of machines of the series PROFI network with low voltage of up to 130V. And the use of a smoothing choke gives a stable welding arc characteristics, making possible to achieve beautiful welds in different spatial positions.

         The superiority of the machines "TERMITE" PRO over the PRO series is as follows:
- more reliable and rigid mounting of the internal elements in the casing that allows you to survive small bumps and falls of the apparatus;
- a more powerful power supply, giving greater stability of the welding arc and is much less susceptible to surges and voltage surges in the network;
- the more powerful the diodes, the greater the number and capacity of capacitors and larger heatsinks, which together gives the best indicator of MON, equal to 90% at maximum current and welding electrode Ø 6mm.

         Special popularity of this series of machines has won the masters outreach, private specialists, contractors, gas services, water utility, road, repair and construction companies.

Welding inverters "TERMITE" series of VDI-PROFI

         Welding machines "TERMITE" series PROFI – most popular model among professionals. Affordable price, simplicity and ease of operation, combined with reliability and increased warranty period of maintenance make this series a hit among the machines "TERMITE».

         In this series apartof, as in the whole technique of "TERMITE", introduced the most modern technologies, improving technical parameters and the quality of the welding. So, today in devices "TERMITE" series PRO used silicon IGBT, which are the main type of fully controllable power transistor switches, short-circuit resistant in the power circuit. TRENCHSTOP™5 IGBT so good, in fact, set a new standard for the complex specifications, and, accordingly, their use gives the technique of "TERMITE" incomparable competitive advantage.

         One of the key indicators and advantages is power consumption and efficiency of the welding machine, i.e. its ability and efficiency in energy conversion. All vehicles "TERMITE" used transformers of amorphous (nanocrystalline) alloys, providing a more than fivefold reduction of losses of idling of transformers compared with traditional magnetic cores from electrical steel. Since the inner inductive losses from inverters "TERMITE" virtually non-existent, all the consumable welding inverter power released in the arc that makes it the most effective!

         Minor level of generated electromagnetic interference allows the use of machines of the series PROFI network with low voltage of up to 130V. And the use of a smoothing choke gives a stable welding arc characteristics, making possible to achieve beautiful welds in different spatial positions.

         The superiority of the machines "TERMITE" PRO over the PRO series is as follows:
- more reliable and rigid mounting of the internal elements in the casing that allows you to survive small bumps and falls of the apparatus;
- a more powerful power supply, giving greater stability of the welding arc and is much less susceptible to surges and voltage surges in the network;
- the more powerful the diodes, the greater the number and capacity of capacitors and larger heatsinks, which together gives the best indicator of MON, equal to 90% at maximum current and welding electrode Ø 6mm.

         Special popularity of this series of machines has won the masters outreach, private specialists, contractors, gas services, water utility, road, repair and construction companies.

Welding inverters "TERMITE" series of VDI-PROFI

         Welding machines "TERMITE" series PROFI – most popular model among professionals. Affordable price, simplicity and ease of operation, combined with reliability and increased warranty period of maintenance make this series a hit among the machines "TERMITE».

         In this series apartof, as in the whole technique of "TERMITE", introduced the most modern technologies, improving technical parameters and the quality of the welding. So, today in devices "TERMITE" series PRO used silicon IGBT, which are the main type of fully controllable power transistor switches, short-circuit resistant in the power circuit. TRENCHSTOP™5 IGBT so good, in fact, set a new standard for the complex specifications, and, accordingly, their use gives the technique of "TERMITE" incomparable competitive advantage.

         One of the key indicators and advantages is power consumption and efficiency of the welding machine, i.e. its ability and efficiency in energy conversion. All vehicles "TERMITE" used transformers of amorphous (nanocrystalline) alloys, providing a more than fivefold reduction of losses of idling of transformers compared with traditional magnetic cores from electrical steel. Since the inner inductive losses from inverters "TERMITE" virtually non-existent, all the consumable welding inverter power released in the arc that makes it the most effective!

         Minor level of generated electromagnetic interference allows the use of machines of the series PROFI network with low voltage of up to 130V. And the use of a smoothing choke gives a stable welding arc characteristics, making possible to achieve beautiful welds in different spatial positions.

         The superiority of the machines "TERMITE" PRO over the PRO series is as follows:
- more reliable and rigid mounting of the internal elements in the casing that allows you to survive small bumps and falls of the apparatus;
- a more powerful power supply, giving greater stability of the welding arc and is much less susceptible to surges and voltage surges in the network;
- the more powerful the diodes, the greater the number and capacity of capacitors and larger heatsinks, which together gives the best indicator of MON, equal to 90% at maximum current and welding electrode Ø 6mm.

         Special popularity of this series of machines has won the masters outreach, private specialists, contractors, gas services, water utility, road, repair and construction companies.

Welding inverters "TERMITE" series of VDI-PRO (LED)

         The new generation of inverters for manual arc welding "THERMITE" series a PRO (with LED screen) was created for the artists who decided to choose welding as my professional career. In the hands of a master PRO (LED) as a toy – brings fun from the process of working with him. Implemented continuous adjustment is not only current, but also the Volt-Ampere Characteristics of the arc, which, respectively, makes it possible to fine-tune for each type of electrodes and metals.

         Concentration of thought, in power electronics, metal, composite industry and development on the basis of microcontroller programming of arc welding – all in order to create a tool for professionals, giving a perfect result.

         In the development of high-tech applied to the following trace elements:
- silicon IGBT power transistors TRENCHSTOP™ 5-th generation (combined from leading manufacturers together with Infineon International Rectifier);
- diodes from International Rectifier with original case PowerTab® to maximize heat sink;
- high temperature 105°C capacitors Elzet™, with design capacity below the capacity of each device (selected during laboratory tests of more than 20 brands, the most reliable and stable in performance with the lowest error of 10-15% of the declared capacity);
- the output electrical circuits are installed on two power diode Ultrafast Soft Recovery firms Vishey™, proven over 15 years of production as the most reliable;
- core from amorphous nanocrystalline iron and
- the winding is of copper of the Litz wire of own production, which increase the efficiency of the unit and reduce energy losses in the inverter data sources not more than 10%.

         In the apparatus used connectors 35-50 mm, with high wear resistance and permeability calculated by the current up to 500A. In these models, the welding cables are not supplied. Each welder chooses desired length and cross section of the welding cables. Someone is enough 2-2,5 meters KG-16, and someone needs to 20 meters KG-35. At customer's request machines can be equipped with welding cables of the desired length.

         Case "anti-stress" and "anti-dust" protects from dust, dirt and falls from a small height. This structural version with separate power and control area, combined with the reliability of parts used, and designed their own circuit design, allow the equipment increased to 5 years warranty from the manufacturer.

Welding inverters "TERMITE" series of VDI-PRO (LED)

         The new generation of inverters for manual arc welding "THERMITE" series a PRO (with LED screen) was created for the artists who decided to choose welding as my professional career. In the hands of a master PRO (LED) as a toy – brings fun from the process of working with him. Implemented continuous adjustment is not only current, but also the Volt-Ampere Characteristics of the arc, which, respectively, makes it possible to fine-tune for each type of electrodes and metals.

         Concentration of thought, in power electronics, metal, composite industry and development on the basis of microcontroller programming of arc welding – all in order to create a tool for professionals, giving a perfect result.

         In the development of high-tech applied to the following trace elements:
- silicon IGBT power transistors TRENCHSTOP™ 5-th generation (combined from leading manufacturers together with Infineon International Rectifier);
- diodes from International Rectifier with original case PowerTab® to maximize heat sink;
- high temperature 105°C capacitors Elzet™, with design capacity below the capacity of each device (selected during laboratory tests of more than 20 brands, the most reliable and stable in performance with the lowest error of 10-15% of the declared capacity);
- the output electrical circuits are installed on two power diode Ultrafast Soft Recovery firms Vishey™, proven over 15 years of production as the most reliable;
- core from amorphous nanocrystalline iron and
- the winding is of copper of the Litz wire of own production, which increase the efficiency of the unit and reduce energy losses in the inverter data sources not more than 10%.

         In the apparatus used connectors 35-50 mm, with high wear resistance and permeability calculated by the current up to 500A. In these models, the welding cables are not supplied. Each welder chooses desired length and cross section of the welding cables. Someone is enough 2-2,5 meters KG-16, and someone needs to 20 meters KG-35. At customer's request machines can be equipped with welding cables of the desired length.

         Case "anti-stress" and "anti-dust" protects from dust, dirt and falls from a small height. This structural version with separate power and control area, combined with the reliability of parts used, and designed their own circuit design, allow the equipment increased to 5 years warranty from the manufacturer.

Welding inverters "TERMITE" series of VDI-PRO (LED)

         The new generation of inverters for manual arc welding "THERMITE" series a PRO (with LED screen) was created for the artists who decided to choose welding as my professional career. In the hands of a master PRO (LED) as a toy – brings fun from the process of working with him. Implemented continuous adjustment is not only current, but also the Volt-Ampere Characteristics of the arc, which, respectively, makes it possible to fine-tune for each type of electrodes and metals.

         Concentration of thought, in power electronics, metal, composite industry and development on the basis of microcontroller programming of arc welding – all in order to create a tool for professionals, giving a perfect result.

         In the development of high-tech applied to the following trace elements:
- silicon IGBT power transistors TRENCHSTOP™ 5-th generation (combined from leading manufacturers together with Infineon International Rectifier);
- diodes from International Rectifier with original case PowerTab® to maximize heat sink;
- high temperature 105°C capacitors Elzet™, with design capacity below the capacity of each device (selected during laboratory tests of more than 20 brands, the most reliable and stable in performance with the lowest error of 10-15% of the declared capacity);
- the output electrical circuits are installed on two power diode Ultrafast Soft Recovery firms Vishey™, proven over 15 years of production as the most reliable;
- core from amorphous nanocrystalline iron and
- the winding is of copper of the Litz wire of own production, which increase the efficiency of the unit and reduce energy losses in the inverter data sources not more than 10%.

         In the apparatus used connectors 35-50 mm, with high wear resistance and permeability calculated by the current up to 500A. In these models, the welding cables are not supplied. Each welder chooses desired length and cross section of the welding cables. Someone is enough 2-2,5 meters KG-16, and someone needs to 20 meters KG-35. At customer's request machines can be equipped with welding cables of the desired length.

         Case "anti-stress" and "anti-dust" protects from dust, dirt and falls from a small height. This structural version with separate power and control area, combined with the reliability of parts used, and designed their own circuit design, allow the equipment increased to 5 years warranty from the manufacturer.

Welding inverters "TERMITE" series of VDI-PRO (LED)

         The new generation of inverters for manual arc welding "THERMITE" series a PRO (with LED screen) was created for the artists who decided to choose welding as my professional career. In the hands of a master PRO (LED) as a toy – brings fun from the process of working with him. Implemented continuous adjustment is not only current, but also the Volt-Ampere Characteristics of the arc, which, respectively, makes it possible to fine-tune for each type of electrodes and metals.

         Concentration of thought, in power electronics, metal, composite industry and development on the basis of microcontroller programming of arc welding – all in order to create a tool for professionals, giving a perfect result.

         In the development of high-tech applied to the following trace elements:
- silicon IGBT power transistors TRENCHSTOP™ 5-th generation (combined from leading manufacturers together with Infineon International Rectifier);
- diodes from International Rectifier with original case PowerTab® to maximize heat sink;
- high temperature 105°C capacitors Elzet™, with design capacity below the capacity of each device (selected during laboratory tests of more than 20 brands, the most reliable and stable in performance with the lowest error of 10-15% of the declared capacity);
- the output electrical circuits are installed on two power diode Ultrafast Soft Recovery firms Vishey™, proven over 15 years of production as the most reliable;
- core from amorphous nanocrystalline iron and
- the winding is of copper of the Litz wire of own production, which increase the efficiency of the unit and reduce energy losses in the inverter data sources not more than 10%.

         In the apparatus used connectors 35-50 mm, with high wear resistance and permeability calculated by the current up to 500A. In these models, the welding cables are not supplied. Each welder chooses desired length and cross section of the welding cables. Someone is enough 2-2,5 meters KG-16, and someone needs to 20 meters KG-35. At customer's request machines can be equipped with welding cables of the desired length.

         Case "anti-stress" and "anti-dust" protects from dust, dirt and falls from a small height. This structural version with separate power and control area, combined with the reliability of parts used, and designed their own circuit design, allow the equipment increased to 5 years warranty from the manufacturer.